| Interface | PCI-Express 4.0x4, NVMe 1.4 |
| Form Factor | M.2 2280 |
| Total Capacity | 500GB |
| NAND | 3D TLC NAND Flash |
| Sequential Read Speed | Up to 5,000 MB/s |
| Sequential Write Speed | Up to 3,800 MB/s |
| Dimension | 80 x 22 x 2.3 mm |
| Mean Time Between Failure (MTBF) | 1.5 million hours |
| Power Consumption (Active) | Average: R: 4W / W: 4W |
| Power Consumption (Idle) (ASPT on) | 20mW |
| Temperature (Operating) | 0°C to 70°C |
| Temperature (Storage) | -40°C to 85°C |
| Warranty | 1. Limited 5-years or 300TBW. |
| 2. Limited warranty based on 5 years or 300TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard.) | |
| 3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) in SMART page of "GIGABYTE SSD toolbox" reaches 100 means out of warranty. (A new unused product will show the number of 0) | |
| Note | • Test system configuration: configuration may vary by models, we will choose the latest platform for verification. |
| • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0. | |
| • Speeds based on internal testing. Actual performance may vary. | |
| • 1GB = 1 billion bytes. Actual usable capacity may vary. |
